| ULTEM 1000 PEI |
Download PDF |
- Cont. Service Temperature 340 F
- High Dielectric Strength
- Withstands 900 autoclave cycles
- Inherently Flame Retardant
- FDA, USDA and USP Class 6 comp.
- Available in Natural and Black
- Rods up to 6” Dia & Plate up to 4”
|
Ultem® 1000 is an amorphous polyetherimide and is one of the most commonly used high performance materials. It offers excellent thermal performance and high mechanical strength and stiffness. It is inherently flame retardant, possesses good resistance to acids and is capable of operating continuously in steam and hot water. Ultem®1000 is offered in Natural (amber transparent) and Black. Natural Ultem®1000 is FDA, USDA and our medical grade is USP Class 6 Compliant. Ultem®1000 is UL 94 V0 Rated. |
| ULTEM 2300 PEI |
Download PDF |
- Cont. Service Temperature 340 F
- Higher tensile strength and rigidity
- Increased Compressive strength
- Improved Dimensional Stability
- Natural color is opaque tan
- UL-94 V0 Rated
- Rods up to 6” Dia & Plate up to 4”
|
Ultem® 2300 is 30% Glass Filled polyetherimide. It offers excellent thermal performance and higher mechanical strength and stiffness than Ultem®1000. It is inherently flame retardant, possesses good resistance to acids and is capable of operating continuously in steam and hot water. Ultem®2300 is offered in Natural (tan) and Black. Ultem®2300 is the industry standard for glass filled Ultem®. 10% and 20% Glass filled is available on a very custom basis. Ultem®2300 is UL 94 V0 Rated. |
| Polysulfone PSU |
Download PDF |
- Cont. Service Temperature 300 F
- Excellent Electrical Properties
- Withstands 50 autoclave cycles
- Stable over a wide Temp. Range
- FDA, USDA, NSF & 3A Dairy comp.
- Transparent light amber color
- Rods up to 6” Dia & Plate up to 4”
|
Polysulfone PSU is a semi- transparent amorphous thermoplastic with a transparent light amber tint. It is a logical progression from standard transparent plastics such as polycarbonate when improved chemical
or higher temperature resistance is required by the application. Polysulfone PSU can be used continuously in hot water and steam sterilization and has excellent chemical resistance to acidic salt solutions. Polysulfone PSU FDA, USDA, NSF & 3A Dairy compliant and can withstand 50 autoclave cycles before it starts crazing. |
| Radel R PPSU |
Download PDF |
- Cont. Service Temperature 320 F
- Excellent Thermal Stability
- Withstands 2000 autoclave cycles
- High Impact Resistance
- Resistant to hydrolysis
- FDA, 3A Dairy and USP Class 6
- Rods up to 3.5” Dia & Plate up to 2”
|
Radel® PPSU (polyphenolsulfone) is an amorphous product that offers improved chemical resistance and thermal stability over most amorphous thermoplastics. Radel® PPSU has the added advantage of superior impact resistance over polycarbonate. It is preferred over all other amorphous thermoplastics, including PEI (Ultem®), where added thermal performance impact resistance and a higher number of steam sterilization cycles is desired. Radel® is available in natural (bone), black, grey, blue and green. Custom colors are also available. |
|
